Futaba GV-1 Manual do Utilizador descarregar pdf (Página 25)

2727

FUNCTIONS

Rotor gear ratio setting

(Rotor gear ratio input)

1Call the "rotor gear ratio" screen

with the FUNC+ or FUNC- KEY.

Rotor

main gear

Engine

pinion gear

2Input the gear ratio

from the DATA+ or

DATA- key.

The rotor gear ratio can be

input in 1/100 steps.

Notes:

-If the gear ratio is not properly set, the set

speed and actual engine speed will be dif-

ferent.

-The gear ratio should be given in the he-

licopter instruction manual. If the helicop-

ter instruction manual does not give the

gear ratio, calculate the gear ratio as fol-

lows:

Gear ratio = N1/N2

Carry values less than 1/1000 to the next

whole number.

Speed setting (Set at control amp)

Three speeds can be set. This is standard when the speed is switched by 3-

position switch. A 2-position switch and a VR channel can also be used.

1Call the "speed set-up" screen

with the FUNC+ or FUNC- key.

(When switch used)

2Set the switch to the de-

sired position and set the

speed with the DATA+ or

DATA- key.

(When VR channel used)

2Set the variable resistor

knob to the fully counter-

clockwise, center, or fully

clockwise position and

set the speed with the

DATA+ or DATA- key.

3 points

can be set

Center

3 points

can be set

Counter

clockwise

Clockwise

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 48 49

Comentários a estes Manuais

Sem comentários

Futaba GV-1 Manual do Utilizador Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Futaba GV-1