Futaba GV-1 Manual do Utilizador descarregar pdf (Página 16)

1818

ASSEMBLY & ADJUSTMENT

Magnet direction check

(Magnet operating side check)

When a battery is connected to the servo

connectors, the control amp is activated.

(Control amp)

Servo

connectors

Sensor

connectors

Sensor

Magnet

1Connect the sensor to

the control amp.

2Connect a battery di-

rectly to one of the servo

connectors.

3Press the FUNC+ or FUNC- key

until the "sensor percentage"

screen is displayed

4Bring the magnet near the end

of the sensor and check the op-

erating side.

This is the side at which the displayed value increases. Install the magnet

with this side facing the sensor. Mark this side of the magnet with a felt tip

pen.

Sensor mounting

The sensor mounting method depends on the helicopter and engine.

1Mount the sensor to the sensor stay. (Temporary

assembly)

2Drill a hole in the fan cover at the part correspond-

ing to the sensor so that the distance between the

sensor and magnet can be made 1 to 2mm.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 48 49

Sem comentários

Futaba GV-1 Manual do Utilizador Página 16